Arctica 4806xp switch Installation Guide Chapter 1 Introduction
4
1, the parity bit as none, the default baud rate as 115200bps.
1.2.2.Back Panel
The back panel of Arctica 4806xp includes 2 alternating current of 220V power mod-
ule (it provides redundancy backups), 4 fan rabbets and 1 rear panel card
Table 1
-
2 The descriptions of rear panel card
Type
10/100/1000Base-T
ETHERNET port
Console port
USB2.0 inter-
face
Arctica 4806xp
1
1
1
Fig 1
-
3
Back panel of Arctica 4806xp
Caution
！
The USB port on rear panel card only support data transmission, does not
support USB power supply
The rear panel card does not support hot plug.
The replacement of rear panel card must be operated by a professional.
1.3.Status LEDs
The indicator light on front panel of Arctica 4806xp has 48 SFP+ ports and 24
QSFP+ port indicator light, 2 power supply indicator light and system automatic diagno-
ses LED. They are shown below and described in the following table.
Table 1
-
3 The explanation of indicator light of front panel
Indicator light
Front panel sign
State
Meanings
Power supply
indicator light
P-1/P-2
Green light al-
ways on
Power supply module move
normally.
