Arctica 4804iqSeries switch Installation Guide Chapter 3 Device Installation
Figure 3
-
4 the figure of Arctica 4804iq switch two power supply installing
Please install the two power supply module according to the following approach:
1. Use a screwdriver to remove the two M3 screws, take off PSU COVER
2.
The two power supply module respectively inserted into the chassis power socket,
the inserted way same as
install the one power.
3. Force the board on the side of AC cable bore to the direction of fan when taking
out the power supply module. And draw the power supply forth.
3.2.3.Installing the Fan
Arctica 4804iq switch has 3 fans in standard configuration.
Figure 3
-
5 The figure of Arctica 4804iq series switch installing the fan
Please install the fan module according to the following approach:
