Arctica 4804iqSeries switch Installation Guide Chapter 3 Device Installation
One power supply module Installing as below:
Figure 3
-
2 The figure of Arctica 4804iq switch one power supply installing
Please install the one power supply module according to the following approach:
1. Take out the power supply module from the little packing box.
2. The golden finger is entad and aim at the power supply rabbet of the machine to
insert to the end downwards. You can hear the lock sound of “click”.
3. Force the board on the side of AC cable bore to the direction of fan when taking
out the power supply module. And draw the power supply forth.
Two power supply module installing as below:
Figure 3
-
3 the figure of Arctica 4804iq switch remove PSU COVER
