6
047657 r7
Bracket
End Seat
Rail Clips
Seat
Cushion
Thumb Screw
Bracket
Side Seat
Rail Clips
Thumb
Screws
Shroud
11. Locate the seat cushion rail mounting
hardware which is attached to the upper
structure. Remove nylon washers, metal
washers, and plastic washers. It is not
necessary to remove the nylon bushing.
12. Slide one of the chair rails over the nylon
bushing. Pull the other chair rail over
the nylon bushing. Install nylon washer,
metal washer and lock nut as shown.
Tighten securely but do not overtighten.
Ensure that the rail pivots freely up and
down and has no side-to-side play.
noTe:
Reinstall cushion and shroud in
the reverse order described in sections
9 and 10.
13. Reinstall seat and shroud by placing seat
cushion over seat rail. Reinstall the two
brackets and secure bracket and seat
cushion to the seat rail using the three
thumb screws. Tighten securely.
14. Insert the bottom of shroud into the
end seat rail clips. Insert the top of the
shroud into the top seat rail clips. See
Figure 5
Figure 4
Figure 5
Summary of Contents for Spirit 3000 Series
