#501272-001 -
Product Manual: PHQR Series Man-Rated Hoist
- Revision 02 - Date: 10-16-2018
Page 7
2.0 - Introduction & Product Information
this product is a part of a man rated confined space entry/
retrieval system. The user must read, understand and follow
the instructions contained in this manual for each component
or total system before using this equipment. Establish an
appropriate training, maintenance and inspection program
for your people and the equipment. Failure to follow these
instructions could result in serious injury or death.
Congratulations on your choice of a Pelsue man rated confined space entry/retrieval system winch to compliment your
entry/retrieval operation. This equipment has been designed and manufactured to exceed confined space requirements
and regulations to meet the needs of the discriminating operator for the efficient and safe entry or retrieval of personnel
from a confined space.
Safe, efficient and trouble-free operation and maintenance for your component or system requires that you or anyone else
who will be operating, maintaining, or inspecting the equipment, read, understand and follow all the safety, installation,
operation, maintenance and inspection instructions contained in this manual. This manual covers the entire line of PHQR
series hoists manufactured by Pelsue. Use the Table of Contents or Index as a guide to find specific information.
Keep this manual handy for frequent reference and to pass to new operators. Establish a regular training program for
experienced and new operators per these instructions. Establish a regular maintenance and inspection program to keep
the equipment in top condition.
2.1 - Serial Number
Always give your dealer the serial number of your Pelsue PHQR series confined space entry/retrieval hoist when order
-
ing parts or requesting service or other information.
The Serial number decal is embossed with the hoist’s serial number as well as a Date of Manufacture (DOM). The serial
number decal will appear as shown in below Figure 2a. Please mark the number in the space provided for easy refer-
ence. The serial number decal is permanently affixed to the hoist. The serial number decal is located on the Pawl Cover
at the drive handle side of the hoist (see Figure 2b) where indicated. !Do Not Remove the serial number decal!
Hoist Model:
Serial Number:
Date Of Manufacture (DOM):
SERIAL NUMBER
LOCATION
Figure 2a:
Serial
Number Decal
Figure 2b:
Serial Number Location
