Pelsue PHQR Series Product Manual Download Page 3

Page: 3 / 32

#501272-001 -

Product Manual: PHQR Series Man-Rated Hoist

- Revision 02 - Date: 10-16-2018

Page 3

ince our inception in 1963 – the T.A. Pelsue

Company has designed and manufactured high

quality equipment to improve the personnel effi

ciency and working conditions in various under-

ground, confined, and outdoor areas.

Founded by T. Allen Pelsue, the company has estab-

lished a continuing reputation for excellence in the

production of fine products for a broad spectrum of

industry throughout the world.

Now, in our second generation of family direction,

continued commitment to innovation and quality

makes Pelsue a leading source of equipment for

many types of confined spaces. We specialize

in safety, retrieval, fall arrest, ventilation, cable

placing, splicing, and maintenance nationally and

abroad. With more than 70,000 square feet of facil

ities available, Pelsue continues the dedication that

has made us pre-eminent in this field.

ISO 9001 Certified

Summary of Contents for PHQR Series

































Search results

Summary of Contents for PHQR Series

Reviews:

Related manuals for PHQR Series

Brands by name

Popular brands

Pelsue PHQR Series, Product Manual

Search results

Summary of Contents for PHQR Series

Reviews:

Related manuals for PHQR Series

Brands by name

Popular brands