pela tools 514019, Manual

Page: 14 / 32

Warning: Chains, bracelets, loose clothing and the
like can cause danger to the user near rotating
parts.
Press the pedal of the mounting table (Z) while
holding the tyre iron in place, to turn the mounting
table (Y) clockwise until the clinch has completely
released from the tyre rim. To solve the second
clinch, use the tyre iron to lift the tyre and release
the tyre from the rim. Press the tilt lever (H) to turn
in the tilt position behind the column and remove
the tyre from the mounting table.
Tire fitting
Warning: Make sure that
the tyres and rims are the
same sizes before fitting.
To avoid damage to the
tyre, lubricate the tyre
clinch and the edge of the
rim with grease
recommended by the
manufacturer. Put the tyre on the rim.
Warning: When gripping the rim with mounting
hooks, avoid placing your hands on the rim to avoid
damage during the operation.
Turn the arm of the mounting head back, put the
tyre on the rim and turn the mounting head back
above the tyre as when loosening the tyre. Place
the lower clamp of the tyre on the rear of the
mounting head from one side, and under the front
of the head from the other side. Press the tyre
either by hand or with the auxiliary arm and turn
the mounting table to attach the lower clamp of the
tyre to the rim. Repeat the operation with the upper
clinch to complete the assembly.
Auxiliary Arm 066 (optional)
Auxiliary arm 066 is a helpful device for tyre
changers, it is used to remove and mount tyres.
Before any operation of this machine is required,
the operator is advised to read the operating
instructions carefully. Do not attempt any
operations that are not listed in it. The
manufacturer is not liable for damage caused by
incorrect operation. Please keep the operating
instructions on hand for consultation.
Working pressure 8-10 bar
Weight 100kg
Package dimension 1550*310*550mm
Noise level LpA<75dB
Safety rules
Use of this device is permitted only for a
professional or a person who has read the
operating instructions and has experience with
machines. This appliance may only be used with
our tyre machines, and we do not guarantee that it
will work with other tyre machines. The
manufacturer takes no responsibility for
modifications that the user makes to the machine.
Installation
Notice!
The installation of this auxiliary device must be
carried out by professional personnel. Disconnect
the unit from the power supply and air source
before mounting.
Transport
Move the unit with a forklift.
Unpacking
When unpacking, check and ensure that all parts
on the packing list are included. If any parts are
missing or damaged, please contact your dealer.
Please keep the package out of the reach of
children.
Workplace needs
The picture shows the
minimum distance (cm)
from the walls after
mounting this auxiliary devi -
ce. Please select the correct
place to install it. Note that
the distance
must be at least 500 mm
from all directions of operation.
Technical data