pela tools 50640, Manual

Page: 18 / 34

Contact
PELA Tools
Solängsvägen 13
SE-513 70 Borås
Telefon: 033-202650
E-mail: order@pelatools.se
Environmental protection /
Scrapping
Recycle any unwanted material,
do not throw it in the household
rubbish. All machines, accessories
and packaging must be sorted and
left at a recycling center and disposed
of in an environmentally friendly manner.
For your safety
Read these operating instructions carefully before
using the machine and keep it for future reference.
Safety rules
Warning! When using power tools, basic safety
precautions should always be followed to reduce
the risk of injury, electric shock and personal injury,
including the following:
• Read all instructions before attempting to use
this product and save these instructions.
1. Keep the work area clean
• Messy work areas invite injury
2. Consider the work environment
• Do not expose the tool to rain.
• Do not use the tool in damp or wet places.
• Keep the work area well lit.
• Do not use the tool in the presence of
flammable liquids and gases.
3. Protect against electric shock
• Avoid body contact with earthed surfaces.
• Make sure the tool is properly grounded.
4. Keep other people away
• Do not allow persons, especially children, who
are not involved in the work to touch the tool or
the extension cord and keep them away from
the work area.
5. Store unused tools
• When not in use, the tool should be stored in a
dry, locked place out of the reach of children.
6. Do not force the tool
• It will make the job better and safer if it is used
at the pace for which it was intended.
7. Use the right tools
• Do not force small tools to do the same job as
a larger tool.
• Do not use the tool for purposes for which it
was not intended.
• The band saw is only intended for metal sawing
and should not be used for sawing in wood.
8. Wear proper clothing
• Do not wear loose clothing or jewellery, they
can easily get caught in moving parts.
• Protective shoes are recommended for outdoor
work. Use hair nets to keep long hair away.
9. Wear protective equipment
• Wear approved safety goggles / face
protection when using this machine.
• Use a face or dust mask.
10. Connect dust extraction equipment
• If the appliance has a device for connecting
vacuum cleaners or collection equipment,
make sure that these are connected and used
correctly.
11. Do not strain the cord
• Never pull on the cord to disconnect it from the
socket.
• Keep cord away from heat, oil and sharp edges.
12. Secure the workpiece
• If possible, use clamps or a screw to secure the
workpiece. It’s safer than using your hands.
13. Do not stretch over the tool
• Keep your balance at all times.
14. Maintain the tool with care
• Keep cutting tools sharp and clean for better
performance.
• Follow the instructions for lubrication and
replacement of accessories.
• Check cables regularly and if any are damaged,
have them repaired by an authorised service
workshop.
• Check extension cords regularly and replace
them if damaged.
• Keep handles dry, clean and free of oil and
grease.
15. Disconnect the tool
• When not in use, before servicing and when
replacing accessories such as blades and
cutters, disconnect the tool from the power
supply.