Peimar Geminus PSI-J3000-TLM, User Manual

Page: 86 / 160

86
EN
6.2.2 State
If the country has been set the LCD shows the machine type when the inverter
is started up, then it automatically displays the inverter operation status: Normal,
Wait, Fault, Update.
Turn on the AC switch, the LCD begins to count seconds backward, after this,
the inverter begins to connect the gird.
The inverter in normal (function) operation
A fault occurs during operation
The inverter in stand-by state
The state of updating firmware
Normal
Fault
Wait
Update
Figure 6.4 Count down seconds
Grid Connecting
Wait 30s
Press the “ENT” button, the display will show the Country options to select.
Pressing the “
▼
“ or ”
▲
“ button move the cursor ”>” to select the correct country
and press “ENT” button to confirm the selection. Then set date and time.
Note: The configuration of the country of usage must be made at the first start,
before the inverter starts operating. An incorrect choice leads to malfunction
of the device. To check the selection made, access the “Inverter-Info > Grid
Compliance”.
If users can not locate the corresponding country, please abort the setting and
contact Peimar assistance.