_______________________________________________________________________________________________________________
Seite 31
peiker acustic GmbH & Co. KG
, Max-Planck-Straße 32, D-61381 Friedrichsdorf, Amtsgericht Bad Homburg HRA 1897
phG: peiker Verwaltungs GmbH, Vorsitzender der Geschäftsführung: Andreas Peiker, Geschäftsführer: Stephan Graf von der Schulenburg, Amtsgericht Bad Homburg 1369
Vorsitzender des Aufsichtsrates: Prof. Dr. Agilolf Lamperstorfer
Ein Unternehmen der peiker Firmengruppe
8.2 Canada (IC)
This Class b digital apparatus comply with Canadian ICES-003.
Cet appareil numérique de la classe b est conforme à la norme NMB-003 du
Canada.
This device complies to Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux
conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi,
meme si le brouillage est susceptible d'en compromettre le fonctionnement.
8.3 OEM Responsibilities
Antenna
-
The antenna gain, including cable loss and based on the capabilities of the
module’s transmitter mounted on the PCBs specified in the related FCC filings,
must not exceed 1,47dBd at 700 MHz & 850 MHz, 6dBi at 1700 MHz , 3.01dBi at
1900 MHz and 9,21 dBi at 2600 MHz for satisfying FCC RF exposure compliance.
-
The antenna gain, including cable loss and based on the capabilities of the
module’s transmitter in a stand-alone configuration, must not exceed 0,77dBd at
700 MHz & 850 MHz, 5dBi at 1700 MHz, 2.01dBi at 1900 MHz and 8,01 dBi at
2600 MHz for satisfying FCC RF exposure compliance.
-
The systems antenna(s) must be installed such that 20 cm is maintained between
the antenna(s) and the body of the user or nearby persons.
-
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter. The preceding statement must be included as a Caution
statement in OEM product manuals in order to alert users of FCC RF Exposure
compliance.
