ECP300 EXPERT STEPPER
Page 2
OPERATION AND MAINTENANCE MANUAL
Rev. 01-20
Thank you for choosing a PEGO electrical panel.
This manual provides detailed information on the installation, use and maintenance of the
ECP300 EXPERT STEPPER series of electrical panels. Our products are designed and
manufactured in compliance with current safety standards, in the specific field of use of
refrigeration and air conditioning systems. Different use is allowed provided that the
operating conditions for which the panel was designed and manufactured are respected.
Before using the panel, it is advisable to read this manual in full, paying particular attention
to the parts highlighted with the symbols described below:
This symbol is placed to indicate notes concerning installation, use and
maintenance operations.
This symbol is placed to highlight notes of particular importance.
This symbol is placed to indicate the prohibition to perform the
indicated operation.
Disposal information:
The electrical panel consists of metal parts and plastic parts. With reference to Directive
2012/19/EU of the European Parliament and of the Council of 4 July 2012 and the relevant
national legislation on the subject, we inform you that:
A. There is an obligation not to dispose of WEEE as municipal waste and to carry out
separate collection of such waste.
B. Public or private collection systems provided for by local laws should be used for
disposal. It is also possible to return the equipment to the distributor at the end of its
life if a new one is purchased.
C. This equipment may contain hazardous substances: improper use or improper
disposal could have adverse effects on human health and the environment.
D. The symbol
(crossed-out wheeled bin) on the product and instructions
indicates that the equipment was placed on the market after August 13, 2005 and
must be collected separately.
E. In the event of improper disposal of electrical and electronic waste, penalties are
established by current local regulations on disposal.
