5
Enter Into Settings
Quit Settings
Attention
：
Press the switch button after Auto Scanning Mode setting is accomplished, the scanner will automatically read the following
barcodes.If re-press the switch button,the scanner will stop reading barcodes. By default, it is not allowed to read the same barcodes.
Under the auto scanning mode, the reading barcode time can be set and time unit as 1s, the parameters range is 0-15s, 0 is infinite and can
set if allowed to repeat reading the same barcode.
Not Allowed to Repeat Scanning
the Same Barcode
Allowed to Repeat Scanning
the Same Barcode
Start Timing after Scanning the Barcode
Attention: 1: Allowed to Repeat Scanning the Same Barcode Setting
When allowed, the scanner will automatically read the following barcodes.If re-press the switch button,the scanner will stop
reading barcodes.
When not allowed, the scanner will automaticallyread the following barcodes. If the same barcode comes again, a continuous
waiting mode will show.If there is no same barcode, the scanner keeps reading till you re-press the switch button, the scanner
stops reading.
2:
Start Timing after Scanning the Barcode Setting
After a successful reading, reading time returns to zero and start timing.
Continuous Scanning Mode
Continuous Scanning
Scanning Interval Time
Scanning the Same BarcodeInterval time
