14
IV Simple Operation Guide
I)Pairing Operation: Insert the receiver into the computer USB interface, the receiver emits
blue lights. Turn on the scanner, scanning “Opening Pairing Setting”, then scanning number
you need(Read “
0
” and “1” represent the channel is 1), this time, the blue light twinkles.
This shows the scanner can communicate.
Attention: All setting must be accomplished before the blue light twinkle(about 10 seconds).
If overtime, pull out the receiver and setting again.
II) ID Setting
After pairing operation is set, scanning“ Opening ID Setting”, then scanning number
you need(Read“0” and “1” represent the ID is 1).
