15
III
）
Switching Off
When the scanner arrives at the previous set sleeping time, it is switched off
automatically (the default setting is 20s ). Meantime it can be switched off compulsively
by pressing the on/off button for 2 seconds. if the sleeping time is too short,
an self-customize sleeping time(e.g.2minutes)
IV) Charging
Please use our equipped charging cable to charge the scanner. If indication light is red,
battery is being charged. When battery is charged fully, the indication light will turn to blue.
Note: Under the “Non-losing Mode”, when the signal exceeds the transmission distance and the
The lost barcode data which are stored will be loaded in the computer automatically as long as
receiving terminal cannot receive signals, barcode data which are read will be stored automatically,
which guarantees the barcode data will not be lost.
the scanner reads ”Upload Data”.(It is suggested that “Clear Data” shall be read at first under this
working mode. In this way, the lost barcode data read at this time can be known clearly when
“Upload Data” is performed after barcodes are read). Under this mode, working will not affected by
