17
Adjusting presser foot pressure
The presser foot pressure should be as light as possible, yet
be sufficient to feed the fabric and obtain the proper stitch
formation. Adjustment is made by loosening nut
1
and turn-
ing screw
2
as required. After this adjustment tighten nut
1
.
Adjusting the up-and-down position
of the presser foot
Moving up the presser foot slightly will have the following
effects.
●
Prevents seam jamming.
●
Prevents fabric damage.
●
Increases durability of the presser foot shoe.
●
Decreases vibration and noise.
●
Can make a fine adjustment to overlap of the fabric.
Bring the needles to the bottom of their stroke. Loosen
screw
3
.
Raise the presser foot by turning adjustment screw
4
clock-
wise.
Create a clearance of 0.3 ~ 0.5mm between presser foot
shoe
5
and bottom surface
6
of the presser foot. After this
adjustment is made, tighten screw
3
.
1
2
Heavy
Light
4
3
6
5
0.3〜0.5 mm
From the library of: Superior Sewing Machine & Supply LLC
Summary of Contents for FS700 Series
Page 2: ...From the library of Superior Sewing Machine Supply LLC...
Page 19: ...16 Threading diagram From the library of Superior Sewing Machine Supply LLC...
Page 34: ...31 From the library of Superior Sewing Machine Supply LLC...
Page 35: ...32 From the library of Superior Sewing Machine Supply LLC...
