MPEG-4 DVR
73
8.1.5 RESOLUTION
Select between 360x240, 720x240 and 720x480. To change the setting, the
recording must be stopped.
8.1.6 RECORD LIMIT
When the setting is specified, the unit erases the playback data automatically
accordingly.
8.1.7 PB DEINTERLACE
Playback Deinterlace.
8.1.8 RUN ON BOOT
Specify which recording mode the unit starts after boot-up.
8.1.9 PASSWORD
Specify if unit should prompt for password when required such as entering Menu or
stopping record.
8.2 TIME
8.2.1 TIME SYNC
If the DVR is connected to the network, and if there are more than one DVR
connected, then a DVR can be configured as the master DVR from which all other
DVRs synchronize their time and date. The default is OFF.
ON: The DVR is set to Slave DVR and synchronizes with the master DVR.
OFF: The DVR is set to Master DVR and does not synchronize with any DVRs.
8.2.2 TIME SERVER
Enter the IP address of the Master DVR. This is applicable only to Slave DVRs.
8.2.3 DATE
Enter the current date in MM/DD/YYYY format.
