MPEG-4 DVR
39
14.2 MOTION RECORDING
Please verify that the motion option has been enabled under RECORD SETUP
menu. Also, verify that the settings for motion grids, motion sensitivity level and
record time have been configured under the MOTION SETUP menu. The motion
grids are all activated by default, thus, unless it has been deactivated, the motion
grid setting may be ignored.
Press the record button and the record icon will
appear as shown on the left. The DVR will be
on record standby mode until motion is triggered.
The DVR does not record as log as there is no
motion.
Motion recording icon will appear on the channel
motion was detected. The channel number will
turn yellow as it starts to record. The illustration
to the left shows channel 1 in motion recording
mode. The duration of the recording will be
based on the RECORD TIME setting under
MOTION setup.
