Pegasus CCTV PNDVR User Manual Download Page 10

Page: 10 / 95

MPEG-4 DVR

REC Status LED

REC

Record / Fast Reverse / Step Reverse

Live Mode

: This button is to start or stop the normal recording

Playback Mode

: This button is used to fast rewind during the playback mode. It is

also used to reverse the frame during the still mode.

Time Search / Stop

Live Mode

: This button is to in into the time search screen.

Playback Mode

: This button stops and exits the playback.

Directional Keys

10.

Schedule Record / Fast Forward / Step Forward

Live Mode

: This button is used to activate or deactivate the schedule recording or

have schedule recording on stand-by.

Playback Mode

: This button is used to fast forward during the playback mode. It is

also used to advance the frame during the still mode.

11.

These buttons have variety of functions such as enter options or to make selections.
They are used to enter numbers when prompted for password, to make
camera/channel selection, to choose the day in schedule option.

12.

This button is used to turn the power on or off

13. USB port used to connect mouse or to upgrade the firmware of the unit using
thumbdrive.

Summary of Contents for PNDVR
































































































Search results

Summary of Contents for PNDVR

Reviews:

Related manuals for PNDVR

Brands by name

Popular brands

Pegasus CCTV PNDVR, User Manual

Search results

Summary of Contents for PNDVR

Reviews:

Related manuals for PNDVR

Brands by name

Popular brands