15 Pegasus Astro
– Copyright 2021
There are two additional buttons (<<< & >>>) that will forward / reverse accelerate the motor. Keep mouse
down and the motor will start accelerating to the direction you have clicked.
Use these buttons only if you need to quickly move in or out your focuser (be careful not to exceed focuser
limits!)
In every motor movement, final position (when motor stops)
is stored after 10 secs into controller’s
EEPROM memory. This will ensure that next time you power on the controller, last saved position will
be retrieved from its memory.
Current Motor Position
Controller continuously (every 500 milisec) reports motor / focuser position. Current
Position
readout can be
found at the control tab. (check image below)
Set A New Motor Position
You can command the motor to move to a new
position. Set the value and click “GO” button.
Motor will start moving to the new position you defined. You can monitor the running motor position on the
position readout.
Emergency Motor Stop
Click the “
HALT
” button and the motor will instantly stop.
A handy button if you want to instantly stop the
running motor.
