Peg-Perego Viaggio 2-3, Instructions For Use Manual

Page: 21 / 48

21
by the manufacturer because it is
an integral part of the seat and is
essential for safety purposes.
• Do not remove or replace parts
in polystyrene because they are
essential for safety purposes.
• In case of doubts, contact the
manufacturer or retailer of this child
car seat.
• This item has a progressive serial
number.
• Do not remove the adhesive or
sawn labels. The removal of these
labels could result in the product not
being compliant with standards.
• Do not use the child car seat if
it is broken or if there are missing
parts, if it is second-hand or if it has
been subjected to heavy impacts as
a result of accidents, because it may
be structurally damaged.
• Do not alter the product.
• Contact the post-sales service for
reparations, the replacement of
components and information on the
product.
Refer to the last page of this manual
for further information.
If the child car seat has been fixed
in place with Isofix fittings, do not
detach it from the fittings.
If the car seat has been fixed in place
with safety belts only, it is possible to
remove it and store it in the luggage
compartment if unused.
• Do not use accessories that have not
been approved by the manufacturer
or competent authorities.
1_ IMPORTANT
• "Viaggio 2/3": this car seat, group
2/3, must be installed in the direction
of travel.
• Do not install “Viaggio 2/3” in an
opposite or transversal location as
compared to the direction of travel.
• It is always advisable to fit the child
seat on the rear seats and on the
passenger’s side.
• If the child seat is installed on the
front seat, it is advisable to place it as
far as possible from the dashboard.
If you experience problems during
the installation of Viaggio 2/3,
try lifting the headrest without
removing it.
2_ Components of the
product
Inspect the content of the package
and contact the Customer Care if
some items are missing.
_ The child car seat includes: 1
headrest (a), 1 backrest (b), 1 seat (c).
The product supplied in its original
packaging is ready for use and
does not require specific assembly
operations.
Features of the product
3• The headrest can be adjusted in 6
positions. Lift the handle on the rear
of the backrest and position it at the
desired height.
IMPORTANT: as the child
grows, it is necessary to adjust