Peg-Perego Viaggio 0+1, Instructions For Use Manual

Page: 28 / 112

28
Maintenance of the padding
Brush the fabric parts to remove dust.
• Before putting the cover in the washing machine
remove the foam rubber cushion from the booster seat
from the back.
• Machine wash at a maximum of 30°C with a delicate
wash setting and short spin cycle.
• Do not use chlorine bleach.
• Do not iron.
• Do not dry clean.
Do not remove stains with solvents.
• Do not tumble dry.
30
°
How to replace the lining on the
Viaggio 0+1 Switchable car seat
To replace the lining of the Viaggio 0+1 Switchable
child seat:
36• From below, slip the safety straps back in through the
slit in the fabric (fig. A).
• Reinsert the strap into the fabric leg divider (fig. B).
37• Fasten this into the hole in the frame.
38• attach the strip to the attachment point of the leg
divider strap
39• thread the lining starting from the seat and moving
upwards, paying attention to the shape of the backrest.
40• Slip the headrest back on, ensuring the red tab passes
through the slit in the fabric.
41• Insert the safety straps in the seat in this order: begin
with the buckle of the shoulder straps and then deal
with the straps.
42• extend the straps and insert them in the seat’s frame (the
straps in the upper hole, the buckle in the lower one).
43• fasten them properly in the back, as shown in the
picture.
• fasten the safety harness straps (point 17)
IMPORTANT: the straps must not be twisted
around.
44• ATTENTION: The central adjuster strap must pass
behind the plastic shield as shown.
45• Open the rear cover and fasten the belts onto the rear
support.
• Fasten the safety belts from the front (point 16).
• apply the booster seat if the child is small and you are
using the seat as a Group 0+ seat.
Serial numbers
46• The name of the product, production date and serial
number of the Viaggio 0+1 Switchable can be found
under the seat.
47• The approval label of the Viaggio 0+1 Switchable is
behind the backrest.
48• Production date of the strap.
This information is required for any complaints.
Product cleaning
• This product requires a small amount of maintenance.
Cleaning and maintenance must only be carried out by
adults.
• It is advisable to keep all the moving parts clean.
• Clean the plastic parts periodically with a damp cloth.
Do not use solvents or similar substances.
• Brush the fabric parts to remove dust.
• Do not clean the polystyrene shock absorbing device
with solvents or other similar products.
• Protect the product from atmospheric agents:
humidity, rain or snow. Extended exposure to sunshine
can cause colour changes in many materials.
• Store the product in a dry environment.
How to read the approval label
• This paragraph explains how to interpret the approval
label (orange label).
• This child car seat is approved to be fixed in a car in
one way only:
fixing system with safety belts with three static
fixing points or winder
(the UNIVERSAL marking
indicates that the car seat is suitable for vehicles with
this kind of safety belt).
• The top of the label displays the trademark of the
manufacturing company and the name of the product.