- 47 -
Installing The Car Seat In A Vehicle
IMPORTANT! ANGLE CHANGE: Check the
angle of the backrest. If a change in position
is necessary, change the angle to the desired
position (a) following instruction at
page 22,
making sure that the seat clicks in one of the
available position (1to 6).
Changing angle in rear facing mode, does
not require re-installation of the seat.
IMPORTANT! LEG SPACE: If more space is
needed for the occupant, it is possible to
move the rebound bar out (b), following the
procedure at
page 17
. To do this, unbuckle the
car seat from the vehicle, move the rebound
bar out and perform a new installation
repeating the procedure above.
Do not leave anti-rebound bar in retracted
position when used in RF mode unless child
weighs less than 15 kg (33 lbs).
IMPORTANT! TOP TETHER STORAGE: When
not in use, keep the tether attached in the
plastic pouch. A free hanging metal hook
could cause injury during a crash.
a
b
