background image

- 34 -

VEHICLE ATTACHMENT DESIGNS AND 

COMPATIBILITY

According to crash statistics, children are safer 

when properly restrained in the back seat 

than in the front seat. Therefore, Peg Perego 

strongly recommends that children using this 

carseat ride in the back seat.

This car seat can ONLY be used on a vehicle 

seat that faces the front of the vehicle.

Do NOT use this car seat on any of the following:

A_Side facing vehicle seats

B_Rear facing vehicle seats 

C_Vehicle seats that rotate in different positions

D_If  your vehicle is equipped with passenger air 

bags (front or side), please refer to your vehicle 

owner’s manual for compatibility and further 

information about carseat installation.

Peg Perego recommends that caregivers 

have their car seat installation checked 

by a certified child passenger safety 

technician. These technicians are trained 

for this specific purpose and are available 

in your area. If additional help is needed 

call Peg Perego Canada Customer Service 

1-800-661-5050 or send an e-mail to 

[email protected].

Vehicle compatibility

NEVER INSTALL 

REAR-FACING IN 

FRONT OF AN 

ACTIVE AIRBAG

A

B

C

D

Summary of Contents for Primo Viaggio





































































Reviews: