Peg-Perego Carrello book plus, Instructions For Use Manual

Page: 9 / 36

- 9 -
_ Apply the brake when loading or unloading children.
COMPONENTS OF THE ITEM
Check the contents of the packaging and if you have
any complaints please contact the Assistance Service.
_ Carrello Book Plus: Basket, 2 rear wheels with brake
mechanism, rear wheel crosspiece and drink holder.
INSTRUCTIONS
1 OPENING: To open the chassis, release the levers on
either side (fig_a), grip the handlebar and swing it
towards you (fig_b). Fig_c shows an open chassis. The
click made by the connection at the bottom (see the
figure) will let you know that the chassis has been
opened properly. PLEASE NOTE: When using the seat
with the chassis, push down on the seat to ensure that
the base is connected properly.
2 FITTING THE WHEELS: Slot the uprights into the rear
wheel crosspiece (fig_a), ensuring that it is facing the
right way, then push the rear wheels on and make
sure that they click into place (fig_b).
3 FITTING THE BASKET: Press the buttons under the
basket tube (fig_a) and remove it (fig_b). Thread the
tube through the basket fabric, making sure that the
springs are facing down (fig_c), and click it back into
place. Attach the basket to the two buttons at the
front (fig_d) and
4 fasten the eyelets at the rear onto the buttons as
shown in the figure, with the upper one going from
the top towards the bottom (fig_e) and the lower one
going from the inside towards the outside (fig_f).
5 FIXED OR SWIVELING FRONT WHEELS: Lift the levers
to prevent the wheels from swiveling (fig_a) and
lower them to allow the wheels to swivel (fig_b). On
uneven surfaces, the wheels should be set to their
fixed position.
6 BRAKE: Press the lever down to apply the brake on the
chassis and lift it to release the brake.
7 ADJUSTABLE HANDLEBAR: To adjust the height of the
handlebar, press both of the side buttons at the same
time (fig_a) and swing it into the desired position
(fig_b), then release the buttons.
8 DRINK HOLDER: Push the drink holder firmly onto the
clip (fig_a). The drink holder can be attached to either
side of the chassis.
9 FOLDING UP: The chassis can be folded up without
the seat, with the seat facing the person pushing
(recline the backrest before folding it) or with the
seat facing forward. To fold the stroller, it is best to
set the front wheels to their fixed position and close
the hood (if fitted). Position the handlebar as shown
in fig_a and lift the levers on the two uprights on the
sides (fig_b). Pull the inner handle on the base (fig_c),
keep hold of it, lift it (fig_d) and swing the handlebar
forward until the chassis is folded.
10 Once the chassis is folded up, check that it has been
secured with the clips on either side (fig_d) and fasten
them if necessary. The chassis is freestanding when
folded up (fig_e). If necessary, it can be made even
more compact by removing the rear wheels. Pull the
pin out and remove the wheel, as in fig_f.
GANCIOMATIC SYSTEM
11 Ganciomatic is a fast and practical system that allows
you to attach the Navetta bassinet unit, the Primo
Viaggio car seat or the Seggiolino Switch seat to the
Ganciomatic Base of the chassis in one quick step.
Place the item on the Ganciomatic Base and press
down with both hands until it clicks into place.
Always apply the chassis or stroller brake before
attaching and removing products (refer to the
respective instruction manuals).
Check that the child transport unit is properly
attached.
SERIAL NUMBERS
12 Information about the production date can be found
on the Carrello Book Plus.
_ The product name, production date and serial number
of the chassis.
This information is required for any complaints.
ACCESSORY
Maxi-Cosi® car seat adaptors: CABRIOFIX, PEBBLE, CITI.
CLEANING AND MAINTENANCE
PRODUCT MAINTENANCE: protect from the weather:
water, rain, or snow; prolonged and continuous
exposure to bright sunlight may give rise to colour
changes of various different materials; store this
product in a dry place.
CLEANING THE CHASSIS: periodically clean all plastic
parts with a damp cloth. Do not use solvent or
similar cleaning products; keep all metal parts dry to
prevent rusting; keep moving parts clean (adjustment
mechanisms, locking mechanisms, wheels, ...) and free
of dust and sand and, if necessary, lubricate with light
machine oil.
PEG-PÉREGO S.p.A.
Peg-Pérego S.p.A. is an ISO 9001 certified
company. This certification is a
guarantee for customers and consumers
of the transparency and trustworthiness
of the company's procedures and
working methods.
Peg Pérego can make changes at any time to the
models described in this publication for technical or
commercial reasons.
Peg Pérego is at the disposal of its customers and
consumers to ensure that all their demands and
queries are fully satisfied. It is a key part of our policy
to ensure we are always aware of our customers'
views and requirements. We would therefore be very
grateful if, after using a Peg Pérego product, you
take the time to fill in our CUSTOMER SATISFACTION
QUESTIONNAIRE, making a note of any comments
or suggestions you might have. You can find the
questionnaire on the Peg Pérego website: www.
pegperego.com
PEG-PÉREGO AFTER-SALES SERVICE
If any parts of your Peg Pérego product should be
accidentally mislaid or damaged, use exclusively
genuine original Peg Pérego replacements. For any
repairs, replacements, product information, and
orders for genuine original replacement parts and
accessories, please contact Peg Perego After Sales
Service indicating the product serial number, if any.
tel. 0039/039/60.88.213 fax 0039/039/33.09.992
e-mail assistenza@pegperego.it website www.
pegperego.com
All manuals and user guides at all-guides.com