11 of 11
ISSUED: 08-17-09 SHEET #: 090-9186-4 02-09-10
Secure cover (C) to wall bracket (A) using two
M5 x 12 mm security washer head screws (N).
Note: Adjust height of wall plate prior to fastening cover (C) for
projector image location. Use security wrench (O) to fasten screws.
SUPPORTING SURFACE NOT
SHOWN FOR CLARITY
N
C
A
Combination for Pitch and Roll Rotation
SUPPORTING SURFACE NOT
SHOWN FOR CLARITY
Tighten knob on back right of projector, and loosen
knob on left front of projector to pitch and rotate
projector backward to the right as shown in fig. 14.1.
Reverse for projector to pitch backward to the left.
Loosen knob on back right of projector, and tighten
knob on left front of projector to pitch and rotate
projector backward to the right as shown in fig. 14.2.
Reverse for projector to pitch backward to the left.
Fig. 14.1
Fig. 14.2
NOTE: For more adjustment, knobs can be
turned individually
15
LOOSEN
DO NOT
ADJUST
TIGHTEN
© 2009 Peerless Industries, Inc. All rights reserved.
Peerless is a registered trademark of Peerless Industries, Inc.
All other brand and product names are trademarks or registered trademarks of their respective owners.
