7 of 11
ISSUED: 08-17-09 SHEET #: 090-9186-4 02-09-10
8
C
B
Place front of upper adapter plate onto flat surface
and slide down wall arm assembly (B) and thread
one M5 x 12 mm security washer head screw (N).
Use security wrench (O) to tighten all screws.
Place upper adapter plate onto edge of table and
hook M5 x 12 mm screws on wall arm assembly (B)
into keyhole slots on upper adapter plate.
NOTE: Screws may need to be loosened if unable to
slide on.
Remove knobs and 1/4" washers from top of adapter
plate assembly (D).
5
6
7
B
B
N
D
KNOBS
1/4" WASHERS
UPPER ADAPTER PLATE
KEY HOLE SLOTS
UPPER ADAPTER PLATE
NOTE: Leave wall arm assembly (B) loose until
desired adjustment is determined.
M5 X 12 MM SCREWS
