10 of 33
ISSUED: 12-26-07 SHEET #: 055-9494-1
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
9
CEILING INSTALLATION
WALL INSTALLATION
(ExCEPT FOR PPC MODELS)
G
G
Adjusting Mount Extension
• On ceiling installations, clamp plate adjustment screws support weight of projector when fully tightened. Weight of
the projector will need to be supported if clamp plate screws are loosened.
WARNING
While supporting the weight of the projector, loosen screws on clamp plate (
G
) half a turn and position projector to
the desired extended position. Retighten clamp plate screws securely.
CLAMP PLATE
SCREWS
CLAMP PLATE
SCREWS
CEILING INSTALLATION
WALL INSTALLATION
(ExCEPT FOR PPC MODELS)
HOOk SLOTS
fig. 8.1
fig. 8.2
L
F
D
L
F
E
HOOk SLOTS
8
guide hook slots of pivot/roll bracket (
F
) onto M5 x 10 mm screws in hanger bracket (
D
or
E
) as shown in figure 8.1
for ceiling installation or figure 8.2 for wall installation. Fasten two socket pin screws (
L
) through slot in pivot/roll
bracket (
F
) and into hanger bracket (
D
or
E
).
• Do not lift more weight than you can handle. Use additional man power or mechanical lifting equipment to safely
handle placement of the projector.
WARNING
Attaching Adapter Plate to Projector Mount (continued)
HOOk SLOTS
