background image

12. GENERAL cONDITIONS 

warranty

The warranty of the product is subject to PEdROLLO S.p.A. general sales conditions.

Acknowledgement of the warranty is bound to the proved and scrupulous observance of the 

use instructions included in this handbook, and the application of good mechanical, hydraulic 

and electro technical rules.

All products have a 12 month warranty that covers manufacturing defects of our products and 

includes replacement/repair of faulty parts.

The warranty is void in the following cases:

• 

If the panel is tampered (modified without prior authorization);

• 

Failure due to missed or improper protection, and/or connection error;

• 

Failure when the limits indicated on the plate are exceeded;

• 

Normal panel wear;

• 

Non-observance of operating given regulations by personnel in charge;

• 

Incidental causes, acts of God, i.e. fires, flooding, water or lightening;

Faulty products must be returned free of charge to PEdROLLO S.p.A., who reserves the indi-

sputable opinion concerning the cause of the defect.

The warranty covers only product characteristics resetting and not damages to persons or 

goods.

Maintenance  

EVOLuTION does not require any type of ordinary maintenance if it is used within the limits 

and in compliance with the indications included in this manual.

Extraordinary maintenance or repairs must be assigned to the authorized service centers.

For repairs use only genuine spare parts. 

The manufacturer cannot be held liable for damages to persons, animals or goods due to 

maintenance works carried out by non-authorized personnel or with non-genuine products.

Disposal 

Strictly follow local environment friendly regulations for disposal and scrapping.

It is however advisable to adopt differentiated waste disposal.

Summary of Contents for EVOLUTION Mono
















Reviews: