Pedigo P-2040 Operator'S Manual Download Page 30

Page: 30 / 40

AINTENANCE

Blanket Warmer

▪

Operator’s Manual

▪

M N-39925

▪

Rev 2

▪

8/20

Continued from previous page

Yearly cleaning

procedure

To clean the warmer yearly, do the following.

Step

Action

Make sure

that the warmer is disconnected from electric power and cool.

Remove

the shelves and support assembly

from the interior of the

warmer.

Clean

the support assembly and interior with a damp cloth.

Dry

the interior of the warmer with a clean, lint-free cloth.

Leave

the door open until the interior of the warmer completely dries.

Clean

each side of the window pane with glass cleaner or distilled vinegar.

Re-install

the support assembly.

Result

The warmer is now clean.

WARNING:

Personal injury hazard.

The blankets may overheat if the shelves and support

assembly are not in place. Make sure to re-install the

shelves and support assembly before operating the

warmer.

EC-TS-005681

Summary of Contents for P-2040









































Search results

Summary of Contents for P-2040

Reviews:

Related manuals for P-2040

Brands by name

Popular brands

Pedigo P-2040, Operator'S Manual

Search results

Summary of Contents for P-2040

Reviews:

Related manuals for P-2040

Brands by name

Popular brands