EN-22
Original User Guide | Pedelec Groove Next
3. Disconnect the top and bottom of the light
cable from the terminals.
4. Use a Torx screwdriver
(TX 30) to turn and loosen the two M4 bolts
on the tail light mounting anticlockwise.
5. Remove the rear light bracket and tail light together with the light
cable.
6. Remove the tail light and its light cable from the rear light bracket.
7. Insert the new tail light and light cable into the rear light bracket.
8. Slide the light cable through the seatpost from above. Use a liner if
necessary.
9. Position the tail light mounting on the seat stays.
10. Fix the rear light bracket and tail light by
hand tightening the M4 bolts clockwise
using a Torx screwdriver (TX 30).
The mounting must be in the guides and be
hand-tightened (TX20).
11. Reconnect both of the light cables.
12. Slide the seatpost into the seat tube. When
doing so, make sure that the light cable
does not get crushed. Position the seatpost
as you want it.
