EN-20
Original User Guide | Pedelec Groove Next
You can obtain the right Smartphone housing for your
Smartphone from retailers such as BBB Cycling
(www.bbbcycling.com).
PLEASE NOTE
Only use the Smartphone holder to hold a Smartphone. Tablets may
be too large or heavy for the holder (they may fall, destroying or
shattering them on the road). Do not exceed a Smartphone size of 7
inches.
Obtain the right Smartphone housing for your phone from BBB Cycling
(www.bbbcycling.com).
3.8
Attaching the reflectors
Your Pedelec comes supplied with two reflectors. Mount the white reflector
on the handlebar, the red reflector on the seatpost and the remaining
reflectors on the wheel.
3.9
Switching the lights on and off
There is a ring on the rear of the front
light. Depending on the direction that
you turn it, the front and rear light will
turn
on or off. You will need to step on
the pedals to activate the lights.
Front light
Rear
3.7
Fitting the Smartphone holder
1. First of all, remove the front light by
loosening the two M4 bolts on the
underside of the stem with a 3 mm Allen
key. Turn the bolts counterclockwise.
For 1. Dismantle the front light
2. Position the lower Smartphone holder
between the front light and the handlebar.
Take care not to clamp the light and control
cables. Tighten the two M4 bolts clockwise
with a 3 Nm torque using a torque wrench.
For 2. Assemble the front light and
lower Smartphone holder
3. Attach the upper Smartphone holder.
Tighten the M3 bolt clockwise with a 1.8
Nm torque using a torque wrench.
For 3. Attach the upper
Smartphone holder
