Pitch 1 and Pitch 2
and
In order to allow stereo pitch shifting yet still have a pitch shifter available which does not use a large amount
of effect space, we have developed a pitch shift effect with a panning input and independent left and right
control. This effect is the only one that can used in two locations in the chain
thus
allowing true stereo and independently controllable pitch shifting on each channel.
By placing two pitch shifters in parallel or series, and setting their inputs and mix levels panned to opposite
sides, independent stereo detuning will be available.
Parameters
The
In
(Input) parameter controls the left/right input pan.
PD:
The
PD
parameter allows up to
46
milliseconds of delay before the pitch transposition
begins. This creates a doubling or chorusing type sound. Range is
The
Pt
parameter is used to select large amounts of transposition in half‘ step increments.
Range is 12 1 octave).
Ct
parameter is used to fine tune the transposed pitch when necessary. Range is
step is 100 cents)
The
Fb
parameter controls the amount of output signal that is sent
to the input
of the
This can used to create climbing or descending pitch type. Range is
The
LM
Mix) parameter controls the direct/effect
to the output of
for
left
output channel. Range is 0400%.
The
RM
(Right Mix) parameter controls the direct/effect
to the output of the effect the right
output channel. Range is 0400%.
A-10
Appendix A
Effects
Summary of Contents for Tube Fex None
Page 1: ......
