This procedure is recommended the first time your Tube Fex is turned on after purchase from your Peavey
dealer. This ensures that the memory is initialized and that the battery is fully charged.
WARNING!
will overwrite all changes made to
unit’s memo y
them
facto y settings. Only
the following if you desire to
the unit.
While holding both the
(down
arrow)
and
arrow
buttons on the front panel, power up
the unit by hirning on the power switch.
The unit has now been initialized to factory settings. It is recommended that you leave the unit turned on
for at least three hours at this time to ensure the battery has a full charge. The unit’s battery should then last
several years before replacement is required. The unit will warn you when the battery is getting low.
Battery replacement must be performed at an authorized Peavey Service Center.
Once the connections are all made, set up the input and output levels of the Tube Fex as follows:
Turn on the Tube Fex and press the
Global
button until you get to the
display; set all level controls
to 0: input level knob on the front of the Tube Fex, output level knob on the front of the Tube
and the
input level control on your power amp (if it has one).
Adjust the input level control on the front of the Tube Fex while playing your instrument. The level should
be set so that the
LED just begins to turn red on your absolute loudest playing level.
Then turn on your power amp. Set the input level control on the amplifier to your normal playing level. No
sound will be heard from it yet.
Finally, slowly adjust the output level control on the front of the Tube Fex while playing until a suitable
playing level is reached.
Set the Bass, Mid and Treble levels to taste. These settings are
global.
This is a very handy feature. For
example: If you develop your effects at home and then go to a live stage and notice that there is not
enough high end in that particular room/stage, all you must do is go to the
display and adjust
the Treble (to taste). This will affect all of your patches.
Chapter
Setup
Summary of Contents for Tube Fex None
Page 1: ......
