Peavey ESCORT 3000, Operating Manual

Page: 28 / 108

Escort
®
3000 Specifications:
Output Power: 80 watts RMS (per channel)
Frequency Response: 40 Hz to 20 kHz +/-3 dB
Overload Protection: 10 dB of DDT
™
that limits the PA output to prevent
clipping that can damage the speakers
Distortion: Less than 0.2% THD @ Max power
Signal/Noise Ratio: 88 dB mic input typical
AC Power: 115 V AC 60 Hz or
230 V AC 50/60 Hz
Weight Assembled: 50 lbs. (22.67 kg)
(stands included)
Dimensions: 14.5” H x 36.75” W x 15.5” D
(36.8 cm x 93.3 cm x 39.4 cm)
Speakers: Woofer 10” (254 mm)
Piezoelectric Horn Tweeter
Escort
®
3000 Troubleshooting Guide
Problem Check Correction
No sound
(LCD not lit) Is power switch on?
Is line cord connected to live power outlet? Turn power switch on
Connect power cord to live outlet
No sound
(LCD not lit) Are MASTER and CHANNEL GAIN controls up? Adjust both MASTER and CHANNEL
LEVEL controls upward to desired
level. Check speaker connections.
Turn mic switch on. Check mic or
sound source connection.
No Effects
Files on USB memory device will not
play back
If it goes away when the CHANNEL or MASTER LEVEL
controls are turned down, then it is acoustic feedback.
Make sure desired effect is selected
in Master effect menu. Check the
master EFX MUTE. If the LED is
illuminated the EFX MUTE is active.
Press the EFX MUTE button once to
disable. Adjust channel EFX control
until audio effect is heard.
Make sure once MEDIA SELECT knob
is rotated to display desired file
the knob is then pressed to cue the
file. Make sure your audio files are
the correct format. See the list of
supported audio formats mentioned
previously in this manual.
Are the channel EFX controls turned up?
Is the master EFX MUTE enabled?
Is an effect activated in menu?
Is the file cued for playback?
Are the audio files the proper format?
Loud howling or squeal from speakers Reduce microphone gain. Reposition
microphone behind or farther
from speakers. Observe FLS light
above EQ and reduce level of
corresponding slider.
Sound is distorted Is the CHANNEL GAIN at a very high setting? Reduce CHANNEL GAIN and increase
MASTER VOLUME