USAGE
USING THE UNIT
SELF-CHECK INDICATOR
USAGE LABEL
NOTE:
Insert both hands into the hand drying area.
The unit will start to run automatically.
Pull hands out slowly, allowing the air to dry hands.
Remove hands once dry.
When a malfunction occurs, the self-check indicator on the right side will
either light up or flash. Turn off power switch, wait about 40 seconds until
all the indicators go off, then turn on the power switch. If the indicator still
lights up or flashes, turn off the power, disconnect the unit from the socket,
and contact your dealer immediately.
Attach the usage label in a visible
location (The front of the unit or
on a nearby wall).
When turning on the unit, flip the power
switch and make sure:
The power indicator lights up
The lamp lights up
The cover of the power supply is closed
HOW TO USE THE AIR IMJECTION HAND DRYER.
(DRY YOUR HANDS FOR ABOUT 7 SECONDS
INSERT BOTH HANDS INTO
DYING AREA
PULL HANDS OUT SLOWLY,
ALOWING AIR TO DRY HANDS
REMOVE HANDS WHEN DRY
4
Summary of Contents for HYPERSONIC GCA206XL
Page 12: ......
