Pearl HYPERSONIC GCA206XL User Manual Download Page 3

Do not open the front panel. There is the risk of electrocution.
Do not let children hang from the unit, this may cause the unit to fall.
Do not let the unit get wet, it can cause electric shocks.
Do not use in a wet environment, where it may come into direct 

contact with water or where condensation may form. This may cause 

electric shocks or unit malfunction.
Do not modify or disassemble the unit unnecessarily. This may cause 

electric shock, fire, or personal injury.
Rated power is required.
If power tolerance is over +/- 10%, there will be breakdown. Incorrect 

power supply usage will lead to fire, electric shock, and/or machine 

malfunction. 
Use dedicated socket.
If using with other appliances, the socket may produce abnormal 

heat leading to fire.
Power must be cut off during maintenance to eliminate the risk of 

electric shock.
Drain tank and air filter must be installed.

Do not switch on until after the power has been connected for 

10 seconds.
If the machine doesn’t work or is behaving abnormally, cut off power, 

close leakage circuit breaker and ask supplier to check and repair.
Machine must have reliable ground connection.
Do not install when the machine is connected to a power source.

Unit must be installed by a professional tradesperseon.
This appliance is not intended for use by persons (including children) 

with reduced physical, sensory or mental capabilities, or lack of 

experience and knowledge, unless they are supervised and/or have 

been instructed on the proper use of the machine from a person 

responsible for their safety.
If the cord is damaged, it must be replaced by the manufacturer, 

service agent or similarly qualified person in order to avoid a hazard.
For additional protection, the installation of a residual current 

device(RCD) having a rates residual operating current not exceeding 

30mA is advisable in the electric circuit supplying the bathroom. Ask 

you installer for advice.

Failure to follow instructions may lead to serious 

property damage and personal injury

Prohibited

Do not allow 

unit to get wet

Do not use

in bathtub or 

shower stall

Disassembling 

prohibited

Ground

Environmental Protection

Electrical waste products should not be disposed of with 

household waste. Please recycle where facilities exist. Check 

with your Local Authority or retailer for recycling advice.

WARNING

2

Summary of Contents for HYPERSONIC GCA206XL













Reviews: