4. Run the
PC-Software
, click the
SET
menu; select the
System
Set;
then select the proper COM port in the
Serial Port Select
.
As for the proper COMport, we can view it in the Device
Manager by following these steps.
*
Right-click the
My Computer
icon on the Windows desktop,
and then click
Properties
.
*
Click the
Hardware
tab and then click
Device Manager
.
*
Scroll through the list of installed devices till you locate the
Ports (Com and LPT)
entry. Click the
plus (+)
beside this
entry to view the installed ports.
5. Select the default sampling rate or you can select other desired
sampling rate.
6. Now press the
Start
in the PC-Software to measure and view
the synchronic data or graph in the software interface.
7. To disable the interface, hold for 2 seconds the USB / REL
button
again. The "RS232" icon disappears from the display and
the interface is disabled.
7. Care and Maintenance
7.1. Installing the battery
Your meter requires a 2 pcs. 1,5 V AAA (UM-4) batteries for power.
The battery symbol appears when the battery voltage drops to the
certain limits. For proper operation, replace the battery as soon as
possible. Continued use with a low battery will lead to abnormal
readings.
-51-
