5. Hz/Duty-button
When measuring ac voltage (or ac current), you can press this
button to select frequency, duty cycle or ac voltage (or ac current)
measurement function, and the display will show the relevant
symbol. In frequency or duty cycle measurement mode, you can
press this button to switch between frequency and duty cycle
measurements.
6. Max.-MIN
– HOLD Function
For measuring the MIN or Max-value make the following steps:
*
Press the „MIN MAX“ button to display the max.
measured value (MAX-Symbol appears in the LCD)
*
Press „MAX MIN“ again to display the min. measured
value (MIN-Symbol appears in the LCD)
*
Press and hold the
„MAX MIN“ button for 1 second to
leave the "MIN MAX"-mode.
7. HOLD/LIGHT-button
The Data-Hold-Function enables to "freeze" a measured value for
later reading in the LCD. For activating the Data-Hold-Function,
press the HOLD-
button. „H“-Symbol appears in the LCD. To leave
the Hold-Function, press the Hold button again or move the
Function switch. To turn on/off the backlight press the HOLD-button
for 2 sec.
8. Function selector
To select the measuring range
9. V/Ω/Hz/
Return terminal for all measurements
10. COM Common Terminal
Return terminal for all measurements
11. mA Input Terminal
For current measurements up to 600 mA DC/AC when the rotary
selector is in the µA or mA position.
-41-