11
V. TEST RUN
1. Install anchor bolts. see Fig.18
Install the anchor bolts to fix the machine after installing.
2.
Adjust safety cable
Raise the lift to the highest position(See Fig.19), rotating the safety lock handle as
the direction of arrow. Loosen the screw of the safety cable by spanner, lift up the
safety lock plate from the rack about 15-20mm (See Fig.20), then tighten the
safety cable by spanner
`
Steps
：
Note: Twisting force is 150N.m for fixing the anchor screw , knock the
anchor bolt into the ground at least 90mm.
Fig.19
Fig.20
Safety
handle
15~20mm
90
m
m
Drilling
Bolting
Tighten
Tighten screw
54
Fig.18
