MU-Thermocouple1 CAN FD – User Manual
27
6.
Click the
Next
button.
7.
Click on the
Modules connected to the CAN bus
radio
button.
8.
In the
Channels of connected CAN hardware
drop-down
menu, select a CAN interface connected to the computer
(e.g. PCAN-USB FD).
9.
In the
Bit rate
drop-down menu, select the bit rate that is
used by the connected CAN bus. A nominal bit rate of
500 kbit/s is preconfigured on delivery.
10.
Click on
Detect
.
In the list, the
MU-Thermocouple1 CAN FD
appears together
with the
Module ID
and
Firmware Version
. If not, check
whether a proper connection to the CAN bus with the
appropriate bit rate exists.
11.
Click
Next
.
12.
Select the
Embedded Firmware
or the
Firmware File
radio
button.
Embedded Firmware
uses the firmware embedded in PEAK-
Flash to update the device.
