MU-Thermocouple1 CAN FD – User Manual
21
5.3
Downloading and Starting the Software
The software does not require an installation and can be started
directly.
Do the following to start the software:
1.
Download the software from this website:
2.
Extract the
*.zip
.
3.
Open the directory and execute the
*.exe
.
5.4
Generating and Transferring a
Configuration
The software Thermocouple FD Configuration guides users step by
step through the configuration. The final transfer of the configura-
tion requires a correct connection via CAN.
Do the following to establish the CAN connection:
1.
Connect your PC-CAN interface from PEAK-System with
your computer.
2.
Establish a correct CAN cabling between the CAN interface
and the measuring unit with proper termination (120 Ohm
on each end of the CAN bus).
3.
In the corresponding configuration step of the software,
select the bit rates that are used by the connected CAN bus.
A nominal bit rate of 500 kbit/s is preconfigured on delivery.
The connection is correct if the MU-Thermocouple1 CAN FD can be
detected in a following configuration step.
