Via the
Error Generator
tab the communication on the CAN bus in test environments
or during the development of CAN buses can be disturbed in a controlled way by 6
consecutive dominant bits. This is a violation of the CAN protocol on the CAN bus
which must be recognized as an error by the connected CAN nodes.
Note:
The Error Generator should only be used by experienced users
and in the development environment. For further information, please
contact our customer support:
You can destroy CAN frames with the error generator by one of two methods:
■
once after activation
■
repeatedly at specific intervals related to a CAN ID
5 CAN Monitor PCAN-View
PCAN-PCI Express
User Manual 4.0.0
© 2022 PEAK-System Technik GmbH
22
