Appendix C Quick Reference
Software/Hardware Installation under Windows
Download the device drivers installation package from our website
www.peak-system.com/quick/DL-Driver-E
. Install the driver before you install the
CAN interface.
Turn off the computer and insert the card into an available PCI Express slot.
The new hardware is detected at the next Windows start and the driver is initialized.
Check the operational readiness. Open the Windows Start menu. Type
Peak
Settings
and press
|
Enter
|
. The window
PEAK settings
appears. The connected
CAN interface is displayed under
CAN Hardware
.
Getting Started under Windows
Run the CAN monitor PCAN-View from the Windows Start menu as a sample
application for accessing the CAN interface. For initialization of the CAN interface
select the desired CAN channel and CAN bit rate.
High-speed CAN connector (D-Sub, 9 pins)
10-pin connector on the
plug-in card
D-Sub plug,
CAN 1 to 4
Assignment
1
1
+5 V (optional)
2
6
CAN_GND
3
2
CAN_Low
4
7
CAN_High
5
3
CAN_GND
6, 7, 8, 9, 10
4, 5, 8, 9
None
Appendix C Quick Reference
PCAN-PCI Express
User Manual 4.0.0
© 2022 PEAK-System Technik GmbH
31
