background image

Go Online or Complete and Return

You can register for your 

FREE 12 month Warranty 

with ease online at 

www.peakscientific protected

.

Alternatively, you can send the completed form to Peak Scientific  y post or 
email at 

warranty@peakscientific com

.

Product Warranty Registration

Contact name

Email address

Company

Address

City/town

Postcode

Country

Telephone

Generator serial #

Model type

Installation date

Do you still use an 

alternative gas solution i.e. 

cylinders or bulk liquid?

Yes                 No

What gas requirements do 

you have in your lab?

Hydrogen             Nitrogen            Zero Air

Extend your cover with

Peak Scientific o er comprehensive gas generator after sales support packages.  

Peak [Protected] aftercare support can guarantee an on-site response within 

72 hours*, genuine parts from our ISO9001 approved factory and a 95% fir t-time 

fix  ate.  See our enclosed Peak [Protected] leaflet  or further information.

Important!

You have 1 month to register your Peak Scientific p oduct from the date of installation. Once registered 

the warranty will be honoured for a period of 12 months. If you wish to defer the installation of your 

generator, you must notify Peak Scientific immedi tely by emailing warranty@peakscientific com. 

For generators that remain unregistered after 1 month from the shipment date, the warranty will be 

considered active from the date of factory dispatch.

* Complete Plan only

Page 19

Go Online or Complete and Return

We know that registering any of your recently purchased products is not the 

fir t thing on your mind- but it is very important to both of us. Not all warranties 

are alike and Peak Scientific  tand out against other gas suppliers as w

e off

er a 

comprehensive, quick response, on-site warranty.  This means that in the very 

unlikely case that your gas generator develops a fault we have rapid support 

teams on-hand around the world who are able to come to your lab and get you 

back up and running in no time.

Register for your 

comprehensive 12 month on-site warranty 

with ease online at 

www.peakscientific com/register.

Alternatively, you can send the completed form to Peak Scientific  y post or 
email at warranty@peakscientific com.

Important!

You have 

1 month to register

 your Peak Scientific p oduct from the date of 

installation. Once registered the warranty will be honoured for a period of 12 

months. If you wish to defer the installation of your generator, you must notify 

Peak Scientific immedi tely by emailing 

warranty@peakscientific com.

 For 

generators that remain unregistered after 1 month from the shipment date, the 

warranty will be considered active from the date of factory dispatch.

Summary of Contents for Genius 1025





















Reviews: