background image

 

 
 
 
Your Source for Healthcare and 

Wellness Infotainment

 

MODEL:

 

PDI-P14T2  

Document Number:

 

PD196-250R5 

 

LCD HDTV with Android Quick Start Guide 

Page 2 of 16 

 

PDi Communication Systems, Inc.   40 Greenwood Lane   Springboro, Ohio 45066 USA   PH 1-800-628-9870  FX 937-743-5664  

 

 
 
 
 
 
 
 

 
 
 

Overhead Falling Hazard 

WARNING:  To prevent injury, this apparatus must be 
securely attached to the floor/wall in accordance with 
the installation instructions. 

TV can pose a striking hazard when mounted at an 
elevated position.  Use only PDi mounting brackets, 
support arms, and appropriate hardware to assure TV 
will not fall from the mounted position 

 

Rain and Moisture 

WARNING:  To avoid the hazards of fire or electrical 
shock, DO NOT expose this television to rain or 
moisture. 

 

Oxygen Environment 

WARNING:  Do not use in any oxygen tent or oxygen 
chamber.  Such use may cause a fire hazard. 
 

Note to Cable TV Installer 

This reminder is provided to call the cable TV systems installer’s 
attention to Article 820-40 of the National Electrical Code.  The code 
provides guidelines for proper grounding and, in particular, specifies 
that the 
cable 
ground 
shall be 
connected 
to the 
grounding 
system of 
the 
building, 
as close to 
the point of  
the cable entry as practical.  Canadian installations shall be properly 
grounded in accordance with the Canadian Electrical Code, Part 1. 

 

FCC 

This equipment has been tested and found to comply with the limits 
for a Class A digital device, pursuant to part 15 of the FCC Rules. 
These limits are designed to provide reasonable protection against 
harmful interference when the equipment is  
operated in a commercial environment. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instruction manual, may cause 
harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful 
interference in which case the user will be required to correct the 
interference at his own expense. 

Maintenance and Servicing 

The TV does not require periodic maintenance other than cleaning.  
Never remove the back cover of the TV; this can expose you to high 
voltage and other hazards.  If the TV does not operate properly, 
unplug it and call an authorized service center or PDi. 

 
Cleaning and Disinfection 

Clean the exterior of this television by removing dust with a lint-free 
cloth.  CAUTION:  To avoid damage to the surface of the television, 
do not use abrasive or chemical cleaning agents.  Spot test a new 
disinfectant by test cleaning a non-obvious small spot on the TV’s 
back cabinet, keypad, and LCD panel.  Allow the disinfectant to 
soak per its instructions and then wipe clean.  Do not use the 
disinfectant if the TV’s surfaces show any sign of discoloration or 
softening. 
 

Product Modification 

Do not attempt to modify this product in any way without written 
authorization.  Unauthorized modification could void the user’s 
authority to operate this product. 
 

Copyright, Trademarks 

© 2014 PDi Communication Systems, Inc. All rights reserved. PDi-
TAB® is a registered trademark of PDi Communication Systems, 
Inc. Product logos, brands and other trademarks displayed within 
PDi’s products are the property of their respective trademark 
holders, who are not affiliated with, endorsing, or sponsoring PDi 
Communication Systems, Inc. or our products. 

Underwriters Laboratories 

The model PDI-P14T2 Hospital Grade LCD HDTV is 
a specialized TV and should be installed to National 
Electrical Code specifications. 
This device is safety tested and listed by the Underwriters 
Laboratories as a product suitable for use in health-care facilities in 
both the United States and Canada. 
 

Disclaimer 

The author and publisher have used their best efforts in preparing 
this manual.   PDi Communication Systems, Inc. makes no 
representation or warranties with respect to the accuracy or 
completeness of the contents of this manual and specifically 
disclaims any implied warranties or merchantability or fitness for 
any particular purpose and shall in no event be liable for any loss 
of profit or any other damages.   The information contained herein 
is believed accurate, but is not warranted, and is subject to change 
without notice or obligation. 

 

 

 

Summary of Contents for PDI-P14T2

















Reviews: