MODEL:
PDi A-Series
Document Number:
PD196-392R2
Quick Start Guide
Page 9 of 10
PDi Communication Systems, Inc.
▪
40 Greenwood Ln
▪
Springboro, Ohio 45066 USA
Phone 800.628.9870
Hospital Mode
USB Cloning
Cloning allows the settings and programming of one TV to be quickly and easily copied over to other TVs by a USB flash drive or
by the PDi RF-HEMiS. Please see the user manual for instructions on cloning with the PDi RF-HEMiS.
To clone by USB flash drive, you must first export the setup information from a programmed host TV to a USB flash drive and
then import that setup information to the other TVs. Cloning can be used to re-program a previously programmed TV.
To clone by USB flash drive, on the TV from which you want to copy the settings/programming, insert a USB flash drive into
any unused USB port on the rear of the TV. Open the TV Setup Menu, select Hospital Mode
1.
Navigate (
▲
or
▼
) to USB Cloning, Firmware, Splash Update. Press Ok or
►
2.
Navigate to Save to USB. Press OK or
►
3.
A message box will appear with the default clone file name. Navigate to the confirm button and press OK on the
remote
4.
A second message box will appear asking you to wait while the clone file is saved to the USB drive. This message
will automatically disappear when the clone file has been created
5.
Remove the USB drive
Next, go to the TV(s) where you would to place the clone file just created. Insert the USB flash drive into any unused USB port
on the rear of the TV. Open the TV Setup Menu, select Hospital Mode
1.
Navigate (
▲
or
▼
) to USB Cloning, Firmware, Splash Update. Press Ok or
►
2.
Navigate to Restore to TV. Press OK or
►
3.
A message box will appear with the available clone files. Navigate to the desired clone file and press OK on the
remote
4.
A message box will appear telling asking you to please wait while the clone file is restored to the TV and that that TV
will automatically reboot when finished
5.
Remove the USB drive and proceed to the next TV
