6
OPERATION GUIDE
•
Supports IEEE 802.11a/b/g/n and ac Wave 2 standards
•
Capable of 2x2, two spatial stream communication concurrently on the 2.4 and
5 GHz bands
•
Supports 20/40 MHz at 2.4 GHz and 20/40/80 MHz at 5 GHz
•
Supports up to 256 QAM
•
Data rates of up to 867 Mbps in 802.11ac 80 MHz channels using reduced
(short) guard interval (SGI)
•
Supports Multiuser MIMO (MU-MIMO) technology
•
Supports Dynamic Frequency Selection (DFS) in required 5 GHz bands
•
Maximal likelihood (ML) decoding
•
Spatial multiplexing, cyclic-delay diversity (CDD), low-density parity check
(LDPC), maximal ratio combining (MRC), and space-time block coding (STBC)
•
AMSDU and AMPDU frame aggregation
•
Compatible with software encryption of AES at 128/256 bits and DES/3DES
•
Compatible with WEP, TKIP hardware encryption or WAPI hardware encryption
This SoC implements half-duplex OFDM on both the 2.4 GHz and 5 GHz radios.
The 5 GHz radio supports up to 867 Mbps when configured in 802.11ac mode
with an 80 MHz bandwidth and short guard interval. It also supports data rates
and mandatory features for the 802.11a, 802.11n, and 802.11ac standards. The
802.11ac features supported include explicit transmit beamforming, implicit
transmit beamforming, MU-MIMO, dynamic bandwidth switching, maximal
likelihood decoding, low-density parity check, maximal ratio combining, space-time
block coding.
The 2.4 GHz radio supports up to 300 Mbps when configured in 802.11n mode
with a 40 MHz bandwidth and short guard interval. It also supports data rates and
mandatory features for the 802.11b, 802.11g, and 802.11n standards. This includes
DSSS and CCK data rates for the 802.11b standard and OFDM data rates for the
802.11g and 802.11n standards. Support for Multiple Input Multiple Output (MIMO)
with multiple spatial streams and 20 or 40 MHz bandwidths are included per the
802.11n standard.
2.2. AP-WiFi-1200 WiFi Features
2.3. AP-WiFi-1200 WiFi Summary
