11
OPERATION GUIDE
If you stop Autoboot, you will see U-Boot displayed on the console.
Here is a summary of the Factory Configuration settings. Often these settings are
changed to match how and where the Access Point is used.
A.
WiFi interfaces are disabled (both 2.4 GHz and 5 GHz radios)
B.
Bluetooth radio is disabled.
C.
Default Radio Settings
- Radio Mode
- Security
- Channel, 802.11 capability (11n, 11ac, legacy), and channel bandwidth
- SSID
- Enabled/disabled
D.
IP address =
192.168.1.1
If, for any reason, you need to return the Access Point to the out-of-the-box state,
follow these instructions.
1.
Be sure OpenWRT is running and the LED Status Indicator is green.
2.
Press and hold the Pushbutton Switch for at least 5 seconds.
3.
Release the Pushbutton Switch.
4.
The console will then display:
RESET TO FACTORY SETTING EVENT DETECTED.
PLEASE WAIT WHILE REBOOTING THE DEVICE.
5.
After rebooting, the Factory Configuration has been restored.
3.6. Factory Configuration
