Brought to you by PCS Electronics, www.pcs-electronics.com
59
Appendix K – Setting up remote control via Ethernet
Software installation
Download the latest EthernetVirtualPort.exe from our website. You can find it here:
http://www.pcs-electronics.com/phpBB2/viewtopic.php?t=2268
Once you have the driver run the setup file and install the program on your computer. This process is very straight-forward
and should only take a few minutes. Wait for the installation to complete and than start the program.
Connect the CYB to your network via Ethernet cable (cable not included). The Ethernet adapter is setup to
accept IP from your router’s DHCP server. It is possible to setup Ethernet adapter with fixed IP or to login directly to
ADSL modem. If you need MAC address of the Ethernet adapter open the cover of the unit and look at the Ethernet
adapter, the MAC address is shown on the adapter. Now create and configure a connection between the PC and
CYB as shown below. Note the IP will differ, but make sure the port is set to 5005!
Fig. 30: Seting up Ethernet connection for CYB, screen 1
Appendix
K
