PINO E - Building Instruction
July 2017
www.pcm.at
13
Before you fix the contacts
to the fuselage with a runny
super glue, make a
test, if
everything is contacted
well
.
5.4 Connection of rudder
Fix the
lever in the control surface
and connect it to the
steel
pushrod
.
Make a
mark for the zero position of the elevator
on the
rudder.
5.5 Canopy
We use a very simple solution to mount the canopy.
Just
glue the carbon stick
into the canopy. Note that the gluing
spot is only
in the middle
of stick and canopy, so you can thread
the stick into the fuselage while the canopy remains on the outer
side.
5.6 Hook for winchstart
There is a
plywood part in the skin of the fuselage
, so that
you can drill holes into the fuselage to position your hook.
We recommend to start with a position of about
2cm in front of
the CG
.
